Saws

Double headed mitre saws

PDG Dual Cut 610, 630, 650

600 mm saw blade for aluminium profiles, operated directly from SchüCal

Servo-motor for angle setting
Rotating and inclining

Technical Data:

Number of CNC-controlled axes:	1	3	5
Mobile head (X axis):	CNC	CNC	CNC
Swivel:	manual	CNC	CNC
Incline:	pneumatic	pneumatic	CNC
Intermediate angles for swivel feature:	Yes	Yes	Yes
Intermediate angles for incline feature:	No	No	Yes
Model:	5,0 m or 6,6 m	5,0 m or 6,6 m	5,0 m or 6,6 m
Motor:	230/400 V / 2x3,7 kW	230/400 V / 2x3,7 kW	230/400 V / 2x3,7 kW
Speed:	2400 rpm	2400 rpm	2400 rpm
Head rotation:	140° (outwards); 22,5° (inwards)	140° (outwards); 22,5° (inwards)	140° (outwards); 22,5° (inwards)
Blade tilt:	90° und 45° (inwards)	90° und 45° (inwards)	90° und 45° (inwards)
Saw blade Ø:	2 x 600 mm	2 x 600 mm	2 x 600 mm
Cutting length (min.):	470 mm (at 90°)	470 mm (bei 90°)	470 mm (bei 90°)
Cutting length (max.):	5000 mm / 6600 mm (depending on model)	5000 mm / 6600 mm (depending on model)	5000 mm / 6600 mm (depending on model)
Weight:	3150 kg / 3370 kg (depending on model)	3150 kg / 3370 kg (depending on model)	3150 kg / 3370 kg (depending on model)

PDG Dual Cut Prospekt (pdf, 3.1 MB)

PDG E-Cut 650, 600 L, 500

650, 600, 500 mm saw blade, for alu profiles, direct controlled from SchüCal

Servo-motor for angle setting

Technical Data:

Model:	5,0 m or 6,6 m	5,0 m or 6,6 m	5,0 m or 6,6 m
Motor:	230/400 V / 2x5,5 kW	230/400 V / 2 x 2,2 kW	230/400 V / 2 x 2,2 kW
Speed:	2800 rpm	2800 rpm	2800 rpm
Blade tilt:	20° (outwards); 45° (inwards)	20° (outwards); 45° (inwards)	10° (outwards); 45° (inwards)
Saw blade Ø:	2 x 650 mm	2 x 600 mm	2 x 500 mm
Cutting length (min.):	350 mm (at 2 x 90°); 352 mm (at 2 x 45°); 270 mm (with Software)	350 mm; 270 mm (at Software)	350 mm; 270 mm (at Software)
Cutting length (max.):	5000 mm / 6600 mm (depending on model)	5000 mm / 6600 mm (depending on model)	5000 mm / 6600 mm (depending on model)
Weight:	2580 kg / 2720 kg (depending on model)	2000 kg / 2280 kg (depending on model)	2000 kg / 2280 kg (depending on model)

PDG Cut 550

550 mm saw blade, for alu profiles, direct controlled from SchüCal

Pneumatic angle setting

Technical Data:

Model:	5,5 m or 6,6 m
Motor:	230/400 V / 2x2,2 kW
Speed:	2800 rpm
Blade tilt:	outwards up to 22,5°
fixed stop at:	90°/45°/22,5° (intermediate adjusted)
Saw Blade Ø:	2 x 550 mm
Cutting length (min.):	less than 370 mm (with Software)
Cutting length (max.):	5000 mm / 6600 mm (depending on model)
Weight:	1900 kg / 2400 kg (depending on model)

PDG Set

500 mm saw blade,for alu profiles, enter dimensions using keyboard

Pneumatic angle setting

Technical Data:

Model:	5,0 m or 6,0 m
Motor:	230/400 V / 2x2,2 kW
Speed:	2800 rpm
Blade tilt:	outwards up to 22,5°
Fixed stops at:	90°/45°/22,5° (intermediate adjusted)
Saw blade Ø:	2 x 500 mm
Cutting length (min.):	300 mm, <300 mm with short section stop
Cutting length (max.):	5000 mm / 6600 mm (depending on model)
Weight:	1830 kg / 2140 kg (depending on model)

PDG Twin

400 mm saw blade,for alu profiles, enter dimensions using keyboard

Pneumatic angle setting

Technical Data:

Ausführung:	4,0 m oder 6,0 m
Motor:	230/400 V / 2x2,2 kW
Drehzahl Sägeblatt:	2800 U/min
Neigewinkel:	45° (außen) -90°
Schwenkwinkel:	45° (außen) -45° (innen)
Sägeblatt Ø:	2 x 400 mm
Schnittlänge (min.):	421 mm; bis auf 210 mm mit Kurzschnittanschlag
Schnittlänge (max.):	4000 mm / 6600 mm
Gewicht:	700 kg / 867 kg (je nach Ausführung)

Glazing beads saws

GS 500

The glazing bead saw unit allows efficient glazing bead preparation, saving a considerable amount of time from measurement through to cutting.

Automatic removal of glazing beads

Technical Data:

Motor:	400 V
Head rotation:	+ 45° / 90° / -45°
Saw blade Ø:	400 mm
Cutting length (min.):	200 mm
Cutting length (max.):	6000 mm
Weight:	480 kg

GS200 / GS100

Glazing bead saw unit allows efficient glazing bead preparation.

Automatic removal of glazing beads

Technical Data:

Model:	GS 200
Motor:	400 V / 2,8 kW
Headrotation:	+ 45° / 90° / -45°
Saw Blade Ø:	400 mm
Weight:	370 kg

GS 50

Profile stop measuring system 50 for optimised measurment of aluminium profiles.

Stop settings can be changed using a servo-motor

Technical Data:

Model:	230 V
Length:	3000 mm
Wide roller track:	400 mm
Operating height:	850 - 1050 mm
Weight:	180 kg

Cutting and mitring saws

PES 400

Single-head profile saw 400 for economical cutting of aluminium profiles.

Technical Data:

Motor:	~ 400 V / 1,8 kW
Speed:	2800 rpm
Mitre range horizontal:	0°/ 90°/ 0°
Modul position:	45°/ 90°/-45°
Saw blade Ø:	400 mm
Extraction branch Ø:	100 mm
Weight:	230 kg

Radial-Arm Saw 215 NS

For aluminium profiles to produce vertical and horizontal mitre.

Adjustment using worm gearing with hand crank

Technical Data:

Motor:	400 V / 3 kW
Speed:	2800 rpm
Cutting width:	450 mm (at 90°)
	310 mm (at 45°)
Cutting height:	215 mm (at 90°)
	150 mm (at 45°)
Mitre range horizontal:	45° (left) / 25° acute angle (right)
Mitre range vertical:	60° acute angle (left) / 30° acute angle (right)
Saw blade Ø:	550 mm
Extraction branch Ø:	100 mm
Weight:	300 kg

Radial-Arm Saw 200 NCS

For vertical and horizontal mitre cuts on aluminium profiles.

Motorised incline adjustment with digital display

Technical Data:

Motor:	~ 400 V / 3 kW
Speed:	2800 rpm
Cutting width:	420 mm (at 90°)
	300 mm (at 45°)
Cutting height:	200 mm (at 90°)
	140 mm (at 45°)
Mitre range horizontal:	45° (left) / 25° acute angle (right)
Mitre range vertical:	60° acute angle (left) / 30° acute angle (right)
Saw blade Ø:	520 mm
Extraction branch Ø:	100 mm
Weight:	350 kg

Radial-Arm Saw 200 NS

For vertical and horizontal mitre cuts on aluminium profiles.

For aluminium profiles to produce vertical and horizontal mitre cuts at all angles.

Technical Data:

Motor:	400 V / 3 kW
Speed:	2800 rpm
Cutting width:	420 mm (at 90°)
	300 mm (at 45°)
Cutting height:	200 mm (at 90°)
	140 mm (at 45°)
Mitre range horizontal:	45° (left) / 25° acute angle (right)
Mitre range vertical:	60° acute angle / 30° acute angle (right)
Saw blade Ø:	520 mm
Extraction branch Ø:	100 mm
Weight:	300 kg

Radial-Arm Saw 170 NS

Adjustment using worm gearing with hand crank

Technical Data:

Motor:	400 V / 3 kW
Speed:	2800 rpm
Cutting width:	430 mm (at 90°)
	305 mm (at 45°)
Cutting height:	170 mm (at 90°)
	115 mm (at 45°)
Mitre range horizontal:	45° (left) / 25° acute angle (right)
Mitre range vertical:	60° acute angle (left) / 30° acute angle (right)
Saw blade Ø:	420 mm
Extraction branch Ø:	100 mm
Weight:	300 kg

PSA

Automatic profile saw, for cutting short lengths or automatic cutting of aluminium profiles.

Technical Data:

Motor:	400 V / 3 kW
Speed:	2800 rpm
Lift automatic feed:	max. 600 mm
Offcut:	min. 90 mm
Saw blade Ø:	400 mm
Mitre range horizontal:	90°
Weight:	350 kg

Schüco BS 550

For vertical length cutting and mitre cut edges on thick-walled aluminium profiles, such as balcony profiles.

Technical Data:

Motor:	400 V / 3 kW
Speed:	2800 rpm
Mitre range horizontal:	20° (on both sides)
Modul postition:	45° (left) / 90° / 45° (right)
Saw blade Ø:	550 mm
Extraction branch Ø:	80 mm and 50 mm
Weight:	827 kg

Cut-Off Saw TL 350 / TL 250

For aluminium and PVC-U profiles with 350 or 250 saw blade.

Technical Data:

Motor:	400 V / 1,5 kW	400 V / 2 kW
Cutting speed:	2700 rpm	3200 rpm
Saw blade Ø:	250 mm	350 mm
Modul position:	-45°/ 90°/ +45°	-45°/ 90°/+45°
Mitre range horizontal:	25° (left) / 45° (right)	25° (left) / 45° (right)
Weight:	56 kg	68 kg

Notching saws

PAS Compact and PAS Compact 650

For notching and cutting aluminium profiles. Double-head saw, automatic saw blade feed and fixed profile loading for cutting.

Technical Data:

Motor:	400 V / 2x3 kW	400 V / 2x3 kW
Speed:	2800 rpm	2800 rpm
Saw blade horizontal:	+60° / -60°	+60° / -60°
Saw blade vertical:	+45° / -60°	+45° / -60°
Profile support:	+60° / -60°	+60° / -60°
Saw blade Ø:	500 / 550 mm	500 / 650 mm
Notching height:	210 mm (at 90°)	260 mm (at 90°)
Notching depth:	190 mm (at 90°)	185 mm (at 90°)
Notching width:	180 mm (at 90°)	230 mm (at 90°)
Weight:	1250 kg	1500 kg

UAS / UAS Digital

For notching aluminium profiles.

UAS Digital: Digital display for 3 angle values

Technical Data:

Motor:	400 V / 2x3 kW
Speed:	2800 rpm
Saw blade horizontal:	+45° / -45° (height adjustment)
Saw blade vertical:	+45° / -45°
Profile support:	+22,5° / -90°/ -22,5° (height adjustment)
Saw blade Ø:	400 / 450 mm
Notching height:	160 mm (at 90°)
Notching depth:	135 mm (at 90°)
Notching width:	250 mm (at 90°)
Weight:	540 kg

AS450 / AS450 Digital

For notching aluminium profiles.

AS 450 Digital: Digital display for 3 angle values

Technical Data:

Motor:	400 V / 2x3 kW
Speed:	2800 rpm
Saw blade horizontal:	height adjustment
Saw blade vertical:	+45° / -45°
Profile support:	+22,5° / -90° / -22,5° (height adjustment)
Saw blade Ø:	350 / 450 mm
Notching height:	155 mm (at 90°)
Notching depth:	110 mm (at 90°)
Notching width:	250 mm (at 90°)
Weight:	400 kg

Steel saws

PDG Steel 400

Double-headed mitre saw with 400 mm saw blade, for steel profiles, can be controlled using SchüCal.

7 CNC-controlled axes:
(movement of saw head (X axis), inclining the W and U-axis, 2x saw blade feed, 2x speed monitoring)
Constant torque through brushless motor controlled by frequency converter
CNC-controlled saw feed
o Adjustable feed rate
o Adjustable cutting depth
o Fast retraction
Ventilation (by sliding the profile supports for protection of the saw blade that moves back after the separating cut)

Technical Data:

Model:	5,0 m
Motor:	400 V / 2 x 4,5 kW
Speed:	40 – 250 1/min, continuous
Blade tilt:	up to 45° (outwards), up to 45° (inwards)
Saw blade Ø:	400 mm
Cutting length (min.):	250 mm Cutting length (90°/90°), > 250 mm with short cutting programm (90°/90°))
Cutting length (max.):	5000 mm for double cut, 9600 mm for excess length cut
Weight:	2800 kg

PSU 450 H

The PSU 450 H steel saw is highly suitable for cutting large steel profiles and steel tubes. The PSU 450 H has an automatic, hydraulic feed. The cutting speed of the saw blade and the initial cutting point can be set using an induction regulator.

Technical Data:

Motor:	400 V / 3/3,6 kW
Speed:	12 / 24 / 48 / 96 rpm
Head rotation:	+30°/+45°/90°/-45°/-30°
Saw blade Ø:	450 mm
Weight:	1250 kg

Hint

We reserve the right to make changes to dimensions and designs in the interests of technical progress.
Illustrations may differ from the original and/or contain options which would incur an additional charge.

FROM THIS SECTION

Metal machinery

Prefabrication Assembly Milling, Drilling, Punching CNC - Machining Shop floor equipment