Schüco Panorama Design Sliding System AS PD 75.HI Design Line
HOW DOES THIS BENEFIT YOU?
The key features of Schüco AS PD 75.HI
Can a Panorama Design sliding door be frameless and barrier-free at the same time?
Yes, it can - with the right technology.
Have you got 3 minutes? Take a look now and get to know the Schüco AS PD 75.HI Panorama Design sliding system.
Schüco AS PD 75.HI - Offers individuality without complexity
The Schüco Panorama Design sliding door AS PD 75.HI brings together the features of multifunctionality and style in various product lines, without sacrificing their individuality. The technical performance features of all the lines are all at the highest level. Additional features such as the integration of sun shading mean that there is a wide choice of configurations for the Panorama Design sliding door. In addition to the standard opening types, the sliding units can be configured as desired and tailored to the requirements of the particular façade design.
Fabrication benefits
- Fewer tool changes on the CNC machine due to standardised sizes.
- No complex recesses required – these are replaced by alternatives (e.g. profile inserts in the vent for attaching the fittings).
- Production can be fully transferred to Schüco PreFab in Paderborn if required.
- The square-cut joint allows the outer frame to be installed directly on site, meaning the awkward transportation of finished frames is no longer an issue.
- The top and sides of the outer frame can be adjusted using adjustment screws, which do not require adjustment brackets.
- Quick inspection: The brush seal is installed in a clip-on profile which can be easily removed from the outer frame.
- Rollers can be installed without tools, using clips instead of toothed lock washers.
- The pull grip and interlock can be easily disassembled thanks to screw-fixing with metric screws.
Gallery
Technical information
- Min. vent height
- 1000 mm
- Max. vent height
- 3500 mm
- Min.-max. vent height
- 1000...3500 mm
- Min. vent width
- 1000 mm
- Max. vent width
- 3500 mm
- Min.-max. vent width
- 1000...3500 mm
- Vent frame face width
- 0 mm
- Min. face width of interlocking section
- 35 mm
- Min. system basic depth
- 218 mm
- Min.-max. system basic depth
- 218...218 mm
- Uw value of window (≥)
- 0,84 W/(m²·K)
- Watertightness
- E 900
- Burglar resistance
- Up to RC 2
- Operating type
- electric, manual
- Max. vent weight
- 800 kg
- Min. face width
- 35 mm
- Max. glass/panel thickness
- 60 mm
- Total basic depth
- 218 mm
- Width of vent frame
- 75 mm
- Max. unit width
- 16300 mm
- Max. unit height
- 3500 mm
- Outer frame face width
- 0 mm
- Min. face width of mullion
- 0 mm
- Min.-max. face width of mullion
- 0...0 mm
- Min. face width of meeting stile
- 35 mm
- Min.-max. face width of meeting stile
- 35...35 mm
- Min.-max. glass/panel thickness
- 40...60 mm
- Area of application
- Internal use, External use, Residential projects, Commercial projects, Doors, Façades, Healthcare, Education, Accommodation facilities
- Meeting stile design
- Yes
- Number of vents
- 4
- Fixed lights/identified vents
- Yes
- Number of tracks
- Double track
- Track material
- Aluminium
- Roller carriage material
- Aluminium
- Surface finishes
- RAL, Powder, Anodised, Paint
- Concealed lock
- Yes
- Concealed drive system
- Yes
- TipTronic
- Yes
- Electronic drive
- Yes
- Opening type
- Type 2A, Type 2A/1, Type 2B, Type 2C, Type 2E, Type 2G/1, Type 2G
- Air permeability
- Class 4
- Wind load resistance
- Class B4/C2
- Drainage levels
- 4
- Schüco sun shading possible
- Yes
- CE marking
- Yes
- Cradle2Cradle
- Yes
Documentation
[Bb] Schüco AS PD 75.HI Design Line
View online
[Cb] Schüco AS PD 75.HI TipTronic Design Line
View online
[Bc] Design Line
View online
[Cb] Schüco AS PD 75.HI TipTronic Design Line
View online
Planning principles
View online
Planning principles
View online
Specification texts
Schüco AS PD 75.HI Design Line TipTronic, a thermally insulated aluminium Panorama Design system
with a basic frame depth of 218 mm.
Design features:
The outer frame has two tracks and is finished with butt joints in the corner areas.
The use of adjustment screws enables the outer frame to be adjusted afterwards.
The polyamide vent profiles must be bonded to the insulating glass unit in accordance with the system specifications to form a structural unit.
The vents are fully countersunk in the outer frame on all sides.
The threshold is 28 mm deep.
The visible area of the interlock section is covered with aluminium cover caps. The face width of the interlock is 35 mm.
When the vent is opened, the side outer frame is covered flush-fitted via a dynamic cover profile.
Optional:
The Design Line can be combined with the concealed, pre-built Schüco AB ZDS sun shading system.
In the interlock section, WoodDesign decorative strips can be applied using an adapter profile.
Profile basic depths:
Outer frame: 218 mm (double-track)
Vent frame: 75 mm
Face widths:
Outer frame: 93.5 - 116 mm (not visible)
Vent frame: 25.5 mm (not visible)
Interlock: 35 mm
Opening types:
2A, 2A/1, 2B, 2C
Maximum dimensions:
Vent weights: up to 800 kg
Max. vent sizes (WxH): 3500 x 3500 mm
Glass thicknesses: 40 - 60 mm
Test values:
Thermal insulation in accordance with DIN EN ISO 10077-2: from Uw = 0.99 W/(m²K)*
Wind load resistance in accordance with DIN EN 12210: up to class B4/C2
Air permeability in accordance with DIN EN 12207: up to class 4
Watertightness in accordance with DIN EN 12208: up to class E750
Burglar resistance in accordance with DIN EN 1628,
DIN EN 1629 and DIN EN 1630: up to RC 2
Operating forces conforming to DIN EN ISO 13115: up to class 2
*Calculation basis: Type 2A/1, WxH 5000 x 2700 mm, glazing 0.6 W/(m²K), Psi 0,034
Test documents
| Document type | Test type | Result | Classification | Document no. / Download |
|---|---|---|---|---|
| Gutachterliche Stellungnahme | Burglar resistance | RC2 / RC2 N | View online Download | |
| Nachweis | Burglar resistance | RC2 / RC2 N | View online Download (pdf, 320.6 KB) | |
| Nachweis | Burglar resistance | RC2 / RC2 N | View online Download (pdf, 320.7 KB) |
Brochures
